Slush Machine Parts

GB Sencotel 10Ltr Tank - Slush Machine Parts10 litre slush tank to fit GB Sencotel slush machines...

GB Sencotel Flat Handle - Slush Machine PartsFlat Handle to fit GB Sencotel slush machines.Slush machine handles often break when the tank is running too low and therefore too much pressure is applied to the handle in an effort to extract the last drips of slush from the machine.Handles are des..

GB Sencotel Gearbox Motor - Slush Machine PartsGearbox Motor to fit GB Sencotel slush machines.There are many reasons for slush machine gearbox failures. The most common include:Poor Quality Slush Syrup – Using inferior quality slush syrup into the tank(s) can cause the mix to over-freeze, plac..

GB Sencotel Drip Tray  - Slush Machine PartsDrip Tray to fit GB Sencotel slush machines...

GB Sencotel Tank Rear Gasket Seal - Slush Machine PartsA common cause of slush machine leaks is that seals are not being cleaned and lubricated regularly enough.It is important to remove the tanks, thoroughly clean them and then lubricate the seals on a weekly basis.Seals can dry out and will c..

GB Sencotel Spiral - Slush Machine PartsSpiral to fit 10Ltr GB Sencotel slush machine tanks.The slush machine "spiral" component most frequently breaks when the machine is powered-off overnight.It is likely that there will be frozen material remaining inside the tank.When the machine is powered..

GB Sencotel Beater Seal - Slush Machine PartsA common cause of slush machine leaks is that seals are not being cleaned and lubricated regularly enough.It is important to remove the tanks, thoroughly clean them and then lubricate the seals on a weekly basis.Seals can dry out and will collect dir..

GB Sencotel Handle Pin - Slush Machine PartsHandle Pin to fit GB Sencotel slush machines...

GB Sencotel Tap Plunger Seal - Slush Machine PartsA common cause of slush machine leaks is that seals are not being cleaned and lubricated regularly enough.It is important to remove the tanks, thoroughly clean them and then lubricate the seals on a weekly basis.Seals can dry out and will collec..

GB Sencotel Tap Piston - Slush Machine PartsTap Piston to fit GB Sencotel slush machines...

GB Sencotel LED Lamp - Slush Machine PartsLED Lamp for 10Ltr tank lids to fit GB Sencotel slush machines...

GB Sencotel Plunger Spring - Slush Machine PartsPlunger Spring to fit GB Sencotel slush machines...

Granisun Tank Rear Gasket Seal  - Slush Machine PartsA common cause of slush machine leaks is that seals are not being cleaned and lubricated regularly enough.It is important to remove the tanks, thoroughly clean them and then lubricate the seals on a weekly basis.Seals can dry out and wil..

GB Sencotel Tank Clip - Slush Machine PartsTank Clip to fit GB Sencotel slush machines (10Ltr tank)...

Sencotel Drive Shaft Bush - Slush Machine PartsDrive Shaft Bush to fit GB Sencotel slush machines...

Sencotel Solenoid Coil - Slush Machine PartsSolenoid Coil to fit GB Sencotel slush machines...